Topic: PLoP not working on Lenovo T510i (Read 1077 times)

kaarsten · « **on:** September 05, 2010, 20:32:50 PM »

It says scanning ports 1 and 2, but it never finds my usb hdd. Any idea why not?

Elmar · « **Reply #1 on:** September 05, 2010, 20:40:50 PM »

is the hd connected to the usb port without hub?
what boot manager version do you use?

kaarsten · « **Reply #2 on:** September 05, 2010, 20:51:45 PM »

Yup, tried connecting it directly to each port on my laptop, no hubs. Still no dice.

I tried 5.0.11-test3 first, then 5.0.11-pcmcia-test3 for kicks. Neither worked.

Elmar · « **Reply #3 on:** September 05, 2010, 21:12:47 PM »

please try 5.0.10 too

what happened when you boot the laptop without hd connected. then do a dummy usb boot without hd connected, then connect the hd and try usb again.

do you see the port scan at ehci, uhci or ohci?

kaarsten · « **Reply #4 on:** September 05, 2010, 21:21:56 PM »

I'm about to try 5.0.10...

I did do the dummy boot, though, and it scanned both ports (EHCI, I think, it was the first one it tries) invariably, it searches two ports first, and for the last two drivers, it finds no hubs.

Elmar · « **Reply #5 on:** September 05, 2010, 21:27:36 PM »

only for ehci??? very strange

when you can use linux, then please post the output of "lspci -v >lspci.txt" as attachment
for windows use pci32.exe http://members.net-tech.com.au/dft0802/downloads.htm

kaarsten · « **Reply #6 on:** September 05, 2010, 21:59:30 PM »

Yup, only EHCI. 5.0.10 has the same results.

This was lspci's output:

Code: [Select]

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
	Subsystem: Lenovo Device 2193
	Flags: bus master, fast devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device 215a
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at 1800 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [d0] Power Management version 2
	Capabilities: [a4] PCI Advanced Features

00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
	Subsystem: Lenovo Device 215f
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at f2827800 (64-bit, non-prefetchable) [size=16]
	Capabilities: [50] Power Management version 3
	Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+

00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
	Subsystem: Lenovo Device 2153
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
	Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at 1820 [size=32]
	Capabilities: [c8] Power Management version 2
	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [e0] PCI Advanced Features
	Kernel modules: e1000e

00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device 2163
	Flags: bus master, medium devsel, latency 0, IRQ 23
	Memory at f2828000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
	Subsystem: Lenovo Device 215e
	Flags: fast devsel, IRQ 11
	Memory at f2620000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
	Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
	Capabilities: [100] Virtual Channel
	Capabilities: [130] Root Complex Link

00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Lenovo Device 2164
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: f2400000-f24fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Lenovo Device 2164
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0000000-f1ffffff
	Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Lenovo Device 2164
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
	Memory behind bridge: f2500000-f25fffff
	Capabilities: [40] Express Root Port (Slot+), MSI 00
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [90] Subsystem: Lenovo Device 2164
	Capabilities: [a0] Power Management version 2
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device 2163
	Flags: bus master, medium devsel, latency 0, IRQ 19
	Memory at f2828400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) (prog-if 01 [Subtractive decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
	Capabilities: [50] Subsystem: Lenovo Device 2165

00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
	Subsystem: Lenovo Device 2166
	Flags: bus master, medium devsel, latency 0
	Capabilities: [e0] Vendor Specific Information: Len=10 <?>

00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Device 2168
	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 11
	I/O ports at 1860 [size=8]
	I/O ports at 1814 [size=4]
	I/O ports at 1818 [size=8]
	I/O ports at 1810 [size=4]
	I/O ports at 1840 [size=32]
	Memory at f2827000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
	Capabilities: [70] Power Management version 3
	Capabilities: [a8] SATA HBA v1.0
	Capabilities: [b0] PCI Advanced Features
	Kernel modules: ahci

00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
	Subsystem: Lenovo Device 2167
	Flags: medium devsel, IRQ 11
	Memory at f2828800 (64-bit, non-prefetchable) [size=256]
	I/O ports at 1880 [size=32]
	Kernel modules: i2c-i801

00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
	Subsystem: Lenovo Device 2190
	Flags: fast devsel, IRQ 11
	Memory at f2626000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: [50] Power Management version 3
	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-

03:00.0 Network controller: Intel Corporation WiFi Link 6000 Series (rev 35)
	Subsystem: Intel Corporation WiFi Link 6000 Series 2x2 6000AGN
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at f2400000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: [c8] Power Management version 3
	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [e0] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Device Serial Number 00-23-14-ff-ff-36-f4-3c
	Kernel modules: iwlagn

0d:00.0 SD Host controller: Ricoh Co Ltd Device e822 (rev 01)
	Subsystem: Lenovo Device 2133
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at f2500000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [78] Power Management version 3
	Capabilities: [80] Express Endpoint, MSI 00
	Capabilities: [100] Virtual Channel
	Capabilities: [800] Advanced Error Reporting
	Kernel modules: sdhci-pci

0d:00.1 System peripheral: Ricoh Co Ltd Device e230 (rev 01)
	Subsystem: Lenovo Device 2134
	Flags: bus master, fast devsel, latency 0, IRQ 11
	Memory at f2500400 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [78] Power Management version 3
	Capabilities: [80] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting

0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd Device e832 (rev 01) (prog-if 10 [OHCI])
	Subsystem: Lenovo Device 2136
	Flags: bus master, fast devsel, latency 0, IRQ 19
	Memory at f2500800 (32-bit, non-prefetchable) [size=2K]
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
	Capabilities: [78] Power Management version 3
	Capabilities: [80] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Kernel driver in use: ohci1394
	Kernel modules: firewire-ohci, ohci1394

ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
	Subsystem: Lenovo Device 2196
	Flags: bus master, fast devsel, latency 0

ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
	Subsystem: Lenovo Device 2196
	Flags: bus master, fast devsel, latency 0

ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
	Subsystem: Lenovo Device 2196
	Flags: bus master, fast devsel, latency 0

ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
	Subsystem: Lenovo Device 2196
	Flags: bus master, fast devsel, latency 0

ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
	Subsystem: Lenovo Device 2196
	Flags: bus master, fast devsel, latency 0

ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
	Subsystem: Lenovo Device 2196
	Flags: bus master, fast devsel, latency 0

Elmar · « **Reply #7 on:** September 06, 2010, 06:22:55 AM »

wow, it has only ehci. strange.
whats the output of "lsusb -v" when the hard disk is connected?

kaarsten · « **Reply #8 on:** September 26, 2010, 20:12:02 PM »

Alright, here's lsusb's output.

Code: [Select]

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.34_rescuecd-0.1 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1a.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 001 Device 002: ID 8087:0020  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x8087 
  idProduct          0x0020 
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Bus 001 Device 007: ID 05e3:0718 Genesys Logic, Inc. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x05e3 Genesys Logic, Inc.
  idProduct          0x0718 
  bcdDevice            0.09
  iManufacturer           0 
  iProduct                1 USB Storage
  iSerial                 2 000000000033
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower               96mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            2.06
  iManufacturer           3 Linux 2.6.34_rescuecd-0.1 ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1d.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             3
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0503 highspeed power enable connect
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
Device Status:     0x0003
  Self Powered
  Remote Wakeup Enabled

Bus 002 Device 002: ID 8087:0020  
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x8087 
  idProduct          0x0020 
  bcdDevice            0.00
  iManufacturer           0 
  iProduct                0 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval              12
Hub Descriptor:
  bLength              11
  bDescriptorType      41
  nNbrPorts             8
  wHubCharacteristic 0x0089
    Per-port power switching
    Per-port overcurrent protection
    TT think time 8 FS bits
    Port indicators
  bPwrOn2PwrGood       50 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00 0x00
  PortPwrCtrlMask    0xff 0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
   Port 7: 0000.0100 power
   Port 8: 0000.0100 power
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Elmar · « **Reply #9 on:** September 26, 2010, 20:16:40 PM »

and now, only to be sure, make a "lsusb -t"

kaarsten · « **Reply #10 on:** September 26, 2010, 20:40:21 PM »

Code: [Select]

Bus#  2
`-Dev#   1 Vendor 0x1d6b Product 0x0002
  `-Dev#   2 Vendor 0x8087 Product 0x0020
Bus#  1
`-Dev#   1 Vendor 0x1d6b Product 0x0002
  `-Dev#   2 Vendor 0x8087 Product 0x0020
    `-Dev#   3 Vendor 0x05e3 Product 0x0718

Elmar · « **Reply #11 on:** September 26, 2010, 20:48:38 PM »

the hard disk is connected with an usb hub to the root hub. so when you have no external hub connected, then its an internal hub. so it will not work with the plop boot manager 5.0.x

Plop Forum

News:

Author Topic: PLoP not working on Lenovo T510i (Read 1077 times)

kaarsten

PLoP not working on Lenovo T510i

Elmar

Re: PLoP not working on Lenovo T510i

kaarsten

Re: PLoP not working on Lenovo T510i

Elmar

Re: PLoP not working on Lenovo T510i

kaarsten

Re: PLoP not working on Lenovo T510i

Elmar

Re: PLoP not working on Lenovo T510i

kaarsten

Re: PLoP not working on Lenovo T510i

Elmar

Re: PLoP not working on Lenovo T510i

kaarsten

Re: PLoP not working on Lenovo T510i

Elmar

Re: PLoP not working on Lenovo T510i

kaarsten

Re: PLoP not working on Lenovo T510i

Elmar

Re: PLoP not working on Lenovo T510i