configure vmware workstation 15 to use plop boot software

Started by xcsae33, December 26, 2019, 06:15:31 AM

Previous topic - Next topic

xcsae33

I want to try a lot of tutorials as given here windows tutorials (tutorial index) https://www.tenforums.com/tutorials/1977-windows-10-tutorial-index.html
So I need to prepare a lot of live USB sticks or USB sticks in the formats in which tutorials mention. Most of these tutorials that I want to try are windows installation media creation, creating recovery disks creating custom partitions etc. I want to try them first on virtual machines then want to try the steps on real hardware.
I read a tutorial here https://www.virten.net/2014/12/howto-usb-boot-a-vm-in-vmware-workstation-11/  for usb booting in VMware.
Here is how my virtual machine settings look like.

I power on the firmware and see the boot options

configure boot options

add boot options

No USB  boot options


So the question is how do I configure vmware workstation 15 so that I can boot using USB sticks.
I tried using plop boot ISO also
I downloaded from this page
https://www.plop.at/en/bootmanager/download.html
I downloaded package
https://download.plop.at/files/bootmngr/plpbt-5.0.15.zip   
tried putting it as an ISO to boot




I selected the plpt iso (which is probably plop boot manager ISO)


how to configue vmware workstation 15 to boot a virtual machine from a bootable usb drive.
There was no effect of using plpt boot ISO. What next can I try?
I am using Vmware Workstation 15 Pro 15.1.0 build-13591040.



Elmar

Your virtual machine is configured to boot in UEFI mode. The Plop Boot Manager is not UEFI compatible.

Usually, you can boot from USB with UEFI without any problems. But the the OS on the USB drive must be UEFI compatible and you need the "EFI/boot" directory with the OS loader on the drive.

mariarivera

Quote from: xcsae33 on December 26, 2019, 06:15:31 AMI want to try a lot of tutorials as given here windows tutorials (tutorial index) https://www.tenforums.com/tutorials/1977-windows-10-tutorial-index.html
So I need to prepare a lot of live USB sticks or USB sticks in the formats in which tutorials mention. Most of these tutorials that I want to try are windows installation media creation, creating recovery disks creating custom partitions etc. I want to try them first on virtual machines then want to try the steps on real hardware.
I read a tutorial here https://www.virten.net/2014/12/howto-usb-boot-a-vm-in-vmware-workstation-11/  for usb booting in VMware.
Here is how my virtual machine settings look like.

I power on the firmware and see the boot options

configure boot options

add boot options

No USB  boot options


So the question is how do I configure vmware workstation 15 so that I can boot using USB sticks.
I tried using plop boot ISO also
I downloaded from this page
https://www.plop.at/en/bootmanager/download.html
I downloaded package
https://download.plop.at/files/bootmngr/plpbt-5.0.15.zip/rice purity test   
tried putting it as an ISO to boot




I selected the plpt iso (which is probably plop boot manager ISO)


how to configue vmware workstation 15 to boot a virtual machine from a bootable usb drive.
There was no effect of using plpt boot ISO. What next can I try?
I am using Vmware Workstation 15 Pro 15.1.0 build-13591040.



To boot from a USB in VMware Workstation 15:

Connect USB: Plug in your USB drive.
Edit VM Settings: Go to Edit > Virtual Machine Settings.
Add USB Controller: Ensure a USB controller is added.
Select USB Drive: Under Removable Devices, choose your USB.
Boot from USB: Power on the VM, enter BIOS, and set USB as the first boot option.
If using Plop, load its ISO first, then select the USB option.