Plop Forum

General Category => Boot Managers => Topic started by: philpense on November 06, 2014, 17:13:43 PM

Title: Bootmanager Installed... How to use USB connection
Post by: philpense on November 06, 2014, 17:13:43 PM
Pleased to report that the Bootmanager v.5 is on my Windows 7 Ultimate notebook.  Can see the following options:

Q HDA Partition
W Profile Data Written
U Loading EHC Driver
I PXE Boot/ Bootmgr Options
F Loading Bootsector
C CDROM Drive
N Blinking cursor

Have Ubuntu on a USB drive and do not see what the next step might be to connect to it and launch.  Although "USB" is an option as shown in the uploaded image I see no command to make this happen. Image should be attached ... Additional link to an uploaded image found at: https://onedrive.live.com/redir?resid=1727C265A60F257A!542&authkey=!AHkDB7ZMGpa-Uwg&ithint=folder%2cbmp

Guidance sought.
Title: Re: Bootmanager Installed... How to use USB connection
Post by: jrmymllr on November 20, 2014, 13:43:49 PM
Keep in mind I have very little experience with Plop, but can't you just highlight USB and press enter?  Or press "u"?
Title: Re: Bootmanager Installed... How to use USB connection
Post by: philpense on November 25, 2014, 21:05:44 PM
Greetings:

Much thanks for the reply. I knew I would get this question. Please note that before posting I tried every key that elicited some response then tried every combination/permutation I could think of.  You are the only one who has posted since Elmar responded to get bootmanager installed. 
Title: Re: Bootmanager Installed... How to use USB connection
Post by: Elmar on November 26, 2014, 11:05:36 AM
philipense, the problem is that your question is so confusing and strange.

does anything happen when you select any entry with the enter key?

elmar