Print Page - ROM brush into the 815 motherboard BIOS, start very slowly

Title: ROM brush into the 815 motherboard BIOS, start very slowly
Post by: fengyun on February 23, 2010, 10:18:50 AM

PLoP Boot Manager （5.0.8/5.0.7) writes into boot.ini, USB1.0 successfully started, start PE was good.
However, the ROM brush into the 815 motherboard BIOS (isa / pci), start very very slowly, suffering,
I know very little English , hoping to get help.

Title: Re: ROM brush into the 815 motherboard BIOS, start very slowly
Post by: Elmar on February 23, 2010, 10:28:22 AM

hi,
what is starting slow, the boot manager or usb booting?

regards
elmar

Title: Re: ROM brush into the 815 motherboard BIOS, start very slowly
Post by: fengyun on February 24, 2010, 02:29:01 AM

Thank you for your concern, the ROM brush into the BIOS, from the PLoP Boot Manager to start the beginning, the whole system become very slow,
PLoP Boot Manager startup screen, select a button "Start Options" to wait for 3 seconds. ... ...
Tualatin CUP, 815 motherboard.

Title: Re: ROM brush into the 815 motherboard BIOS, start very slowly
Post by: zhangbear on May 03, 2010, 09:21:38 AM

815 motherboard is USB 1.0 no USB2.0, So boot slowly ,it's that the answer?

Title: Re: ROM brush into the 815 motherboard BIOS, start very slowly
Post by: fengyun on May 21, 2010, 07:52:14 AM

no.no,writes into boot.ini, USB1.0 successfully started, start very Quickly
Brush into the bios is not normal
However, I have thrown away the 81.5 board, ... ... do not want to play anymore.

Plop Forum

General Category => Boot Managers => Topic started by: fengyun on February 23, 2010, 10:18:50 AM