Plop Forum

General Category => Boot Managers => Topic started by: euroscan on February 11, 2010, 22:27:10 PM

Title: no boot device after search USB, plpbt in TEXT mode.
Post by: euroscan on February 11, 2010, 22:27:10 PM
- USB KINGSTON DATATRAVELER boot perfect to DOS without any problems.
- M/B ASUS CUSL2 BIOS doesn't support boot from USB.
- run plpbt from CD-ROM start make search for USB and have error
- sorry for this photo.

Quote
loading EHCI driver
searching  on hosts
drivers removed
loading UHCI driver
searching on host
host 1
port 1 no mass storage device
KINGSTON
DATATRAVELER 2.0
host 2
port 2 no mass storage device

*** BOOT ERROR ***
NO BOOT DEVICE FOUND, please ...

- plpbt in text mode, graphics mode make error : press CTRL-ESC.
- trying next pendrive, PQI, Crusader and always is BOOT error .
--
(http://img716.imageshack.us/img716/5597/plop1.th.jpg) (http://img716.imageshack.us/i/plop1.jpg/)

Title: Re: no boot device after search USB, plpbt in TEXT mode.
Post by: Elmar on February 12, 2010, 00:17:31 AM
it looks like that the "use usb masstordev"  option in the setup is not 1
Title: Re: no boot device after search USB, plpbt in TEXT mode.
Post by: euroscan on February 12, 2010, 18:43:30 PM
thanks for this solution, working good.

--
(http://img40.imageshack.us/img40/2273/plp0t.th.jpg) (http://img40.imageshack.us/i/plp0t.jpg/)
--
(http://img7.imageshack.us/img7/5303/plp1t.th.jpg) (http://img7.imageshack.us/i/plp1t.jpg/)
--
(http://img638.imageshack.us/img638/2783/plp2t.th.jpg) (http://img638.imageshack.us/i/plp2t.jpg/)