Author Topic: Option ROM seems to have no effect. Asus Pundit-S  (Read 2833 times)

cb12

  • Newbie
  • *
  • Posts: 1
Option ROM seems to have no effect. Asus Pundit-S
« on: June 06, 2011, 19:45:59 PM »
Hi, I have a little bit of a problem creating a Award BIOS ROM for my asus pundit-s with onboard nic.
Plop doesn't seem to be hooked by the bios, regardless of the bios boot options I use.

This is the way i created the rom:
0. Downloaded plpbt-5.0.12.zip
1. Creating the rom.
Code: [Select]
plpbtrom -vendorid 0x14E4 -deviceid 0x4401 -INT18 plpbtrom.bin plpbt.rom
INT18  - is used because the bios explicitly states "Boot Other: Network (INT18h)"
But I also tried without.

2. I continue with acbrom and release my vga rom and epa logo. (Seems to work fine without)
3. inserting the rom:
Code: [Select]
acbdrom /NET plpbt.rom
4. Then I flash the file via aflash.
5. Reboot, System comes up, without plop :(

Some questions I have:
How can I determine what is happening?
How does a PCI device place its boot rom in C0000h-EFFFFh? (according to BIOSBootSpecs)
How can I determine which space in C0000-EFFFF is not used?

bomz

  • Full Member
  • ***
  • Posts: 112
Re: Option ROM seems to have no effect. Asus Pundit-S
« Reply #1 on: June 07, 2011, 08:49:42 AM »
I think that plpbt.rom for AMI bios only. but not sure


http://forum.plop.at/index.php/topic,1070.0.html

Golffies

  • Newbie
  • *
  • Posts: 5
Re: Option ROM seems to have no effect. Asus Pundit-S
« Reply #2 on: February 19, 2019, 13:47:13 PM »
Hello,

4. Then I flash the file via aflash.
5. Reboot, System comes up, without plop :(


After having flashed your enhanced BIOS, have you been thinking about switching the boot device order, in the Award BIOS setup ?

I guess that once you inserted the Plop option rom in place of the genuine boot-from-the-network module, nothing may happen until you would actually instruct the BIOS... to boot from the "network" (i.e. to chain to the Plop rom).


I know that the thread is old, but I would be interested to share observations and results with you, as a P4S8L motherboard owner. I try to install the Plop option rom to the same Bios as yours. The goal here is to give USB booting capability to the machine and make of it a very nice platform for Lakka retro-gaming distribution.


Hope to see you online in the future.