ploplinux 4.1.0 have no sound !

Started by sqkjwx, November 01, 2010, 14:26:29 PM

Previous topic - Next topic

sqkjwx

after nfs boot to gnome, use gnome player play any media ,but none can make sound .   please tell me how to solve it .

Elmar

did you load the sound card modules? use  "pciprobe"

regards
elmar

sqkjwx

Quote from: Elmar on November 01, 2010, 14:50:42 PM
did you load the sound card modules? use  "pciprobe"

regards
elmar

thank you very much ,now it works after using "pciprobe"

Elmar

fine

you know, you can add this command to the rc.local, then you dont have to run it manually.

best regards
elmar

Belive

Under plop 4.1.2
In terminal:
root@ploplinux ~]# pciprobe
Checking for other PCI hardware ...
Loading  ...................................   [snd-intel8x0]
[root@ploplinux ~]#

Still no sound.

So I further tried alsamixer in terminal, but as I never used it I do not know how to check if volume is muted.

Re:http://forum.plop.at/index.php/topic,10.0.html
Quote

    and all the mixer bars to bring the vol up and down.


i think below the mixers you will see "MM" that means mute. press "m" to unmute the mixer.
Well, I see at extreme left of alsamixer, a bar named <Master> and according to the fact that I key m it switches between "mm" and "00" and in both cases no sound.
Wanna lspci with another distro ?

Elmar

Quote from: Belive on August 30, 2011, 12:57:55 PM
Under plop 4.1.2
In terminal:
root@ploplinux ~]# pciprobe
Checking for other PCI hardware ...
Loading  ...................................   [snd-intel8x0]
[root@ploplinux ~]#

Still no sound.

So I further tried alsamixer in terminal, but as I never used it I do not know how to check if volume is muted.

Re:http://forum.plop.at/index.php/topic,10.0.html
Quote

    and all the mixer bars to bring the vol up and down.


i think below the mixers you will see "MM" that means mute. press "m" to unmute the mixer.
Well, I see at extreme left of alsamixer, a bar named <Master> and according to the fact that I key m it switches between "mm" and "00" and in both cases no sound.
Wanna lspci with another distro ?

with cursor up and down, you controll the volume in alsamixer. if available, then you have to set master and pcm

Belive

Solved thanks.
How can I make this permanent without relaunching each time alsamixer?
I uncommented in rc.local pciprobe ( why is it by the way, to boot faster ?)

Elmar

Quote from: Belive on August 30, 2011, 15:35:40 PM
How can I make this permanent without relaunching each time alsamixer?

i can tell it you the command, but investigate at first by yourself. years ago, i had to do it too

Quote from: Belive on August 30, 2011, 15:35:40 PM
I uncommented in rc.local pciprobe ( why is it by the way, to boot faster ?)

how can it be faster with pciprobe when it has to load the correct modules first? i can't believe that it boots faster with pciprobe.